Windows XP Professional X64 Fresh CD Install on a New Hard Drive

    

INTRODUCTION

Welcome to Microsoft's Windows XP Professional X64 Install step by step Emulation. This will give you an idea on how to do this when and if the time arises for you to either reinstall the operating system, install for the first time or upgrade your present operating system. This install guide is fully graphical and will take you through each step of the installation. 

What you will require to do this walkthrough is 

  1. A Windows XP Professional CD

  2. A Computer with CD-ROM access

To start this Windows install. First check that the first boot device in your system BIOS is set to the  CD-ROM Drive.

( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your Laptop. (The system bios can usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key. Make sure you save the settings before exiting))

If you are unsure or don't want to enter the BIOS then just test the computer by putting the CD-ROM in the drive and reboot your computer. This is the recommended way to install windows.

  

Click here to begin the install emulation


 

Privacy policy - Link Exchange - links page - Contact Info

By using this website you are agreeing to this Disclaimer & Legal statement (Click to view)

www.windowsreinstall.com

 

Reinstall 98, 98 install, install windows 98, win98, 98, 98 Professional, 98 SE, win98 guides, 98 parallel install, fix 98, windows 98 guide, 98 system specs, required specs, new, updates, win98 dos install