Microsoft's Windows 98 - Reinstall Windows with a boot disk and from the hard drive
Welcome to Microsoft's Windows 98 reinstall step by step using a boot disk and from the hard drive. This will give you an idea on how to do this when and if the time arises for you to either reinstall the operating system, install for the first time or upgrade your present operating system. This install guide is fully graphical and will take you through each step of the installation.
What you will require to do this walkthrough is
A Windows 98 CD
A Windows 98 Floppy Boot Disk
A Computer with CD-ROM access
|98 Boot Disks|
|Need CD-Rom Support|
To start this Windows install. First check that the first boot device in your system BIOS is set to the Floppy Drive.
( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your computer. (The system bios can usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key. Make sure you save the settings before exiting))
If you are unsure or don't want to enter the BIOS then just test the computer by putting the CD-ROM and floppy disk in their drives and reboot the computer.
You will know that your computer will/has booted of CD-ROM when the following screen appears.
|Tags: Reinstall Windows 98, install Windows 98, 98 install, reinstall 98, 98 reinstall, install 98, 98se, install 98se, install win98, reinstall win98, install windows 98, reinstall windows 98|