Windows 95, 98 and me, refresh driver install guide

DRIVERS - Refresh driver

In device manager highlight the device you want to reinstall, ((Communications port COM 2 in this example) the device you want to refresh may not be working or have an exclamation mark beside it) select remove and confirm removal by clicking ok, this device will then be removed from device manager.

Now click on “Refresh” in device manager

Windows will find new hardware

On this occasion a Communication Port.

Windows will install Driver, and operation is complete.

Now test the device. This option can be very handy, and can resolve alot of problems very quickly.

THE END

Disclaimer

Any named products on this website are copyright © and/or trademarks ™ of their respective companies.

INFORMATION ON THIS WEB SITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.

Information on this web site may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. Windows Reinstall or the author will not be responsible for damage or loss of data. You are advised to backup data regularly

Whilst every effort is made to ensure the correctness of the information contained herein, the author can accept no responsibility for damages caused directly or indirectly from the use of such information. By entering this site you are agreeing to this and also to never suing the author.